Vennligst vent...

Produktet ble lagt i handlekurven.Se handlekurven her
Hjem   |   Kampanjer   |   Service   |   Kontakt oss   |   Om oss
    
   
Logg inn
Glemt passord?
Forsiden Datamaskiner Hjem/Fritid Kamera Komponenter Lagring Minne
Søk
 
 
   

Nettverkstilbehør

1000294183

Allied Telesis TAA 10/100TX POE+ TO 100FX/SC IND TEMP FAST ETH MEDIA CONV IN ACCS (AT-IMC200TP/SC-980)

Produkt: Mediekonverterere
5 614,-
 
Kjøp
(4 491,20 ekskl. mva)
På lagerPå lager: 10

Se hva din månedlige kostnad vil bli ved avbetaling

Kampanje:
Nedbetalingstid: 36
Månedskostnad: 268,16
Les mer
Beskrivelse

10/100/1000T to 100FX/SC Industrial temperature PoE+ media converter. These converters support 802.3at, PoE+, 30W, LTPoE++ and 4-pair up to 70W. The IMC200TP/SC-980 features Remote Power Cycle and Smart MissingLink™ (SML) and is fanless for silent operation.

Powering remote devices
Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.

The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.

Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.

In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.

Remote Power Cycle
The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.

Jumbo frame support
Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.

Smart MissingLink™ (SML)
The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.

- Converts speed as well as media type
- Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W
- Supplies up to 70W of PoE power
- Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)
- Auto MDI/MDI-X
- Smart Missing Link (SML)
- Supports up to 10K jumbo frames
- Supports multi-mode fiber
- 4K MAC address table
- Store-and-forward switching mode
- Transparent to IEEE 802.1Q packets
- Standalone or DIN rail mount
- Fanless for silent operation

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.
Handlekurven
Handlekurven din er tom.
Konfiguratorer
Rett i postkassen
Meld deg på for å motta spesialtilbud og nyheter per epost
    Velg

 

 

Kategorier     Produsenter